Hello everyone,
i want to use temperature dependent correlation of inside convective heat transfer coefficient of the wall in TRNSYbuild rather than to use fixed default value. As inside coefficient depends upon difference of the air temp inside and wall internal surface temperature. i want to use TRNSbuild surface temperature output as an input for defining
inside convective heat transfer coefficient = 1.247 (Tair-Tsurf)^1/3 can i use these inputs from TYPE 56 in simulation studio and then after putting equation again insert in type 56. or any other way to handle this problem.
Thanks you for killing your time to read my problem.
Thanks
Adnan