Dear David Bradley,
thank you for the quick answer.
I have the 17.01 version and I haven't in the directory the example.
How can I obtain the updating of trnsys and the example required?
Best regards.
Domenico Mazzeo
Domenico,
If you are using the most recent version of TRNSYS (17.02.0005) then there is an example called ..\Trnsys17\Examples\PVT\PVT.tpf that includes a PV, a battery, a charge controller/inverter, and a load. Please note that if you are using Type47 for your battery model then there is an output called "state of charge," whose units are Ah (amp-hours) and that there is another output called "fractional state of charge." The fractional state of charge should not go much over 1 but the state of charge can. Please also note that the "state of charge" output is for one cell in the battery, not for the entire battery bank.
kind regards,
David
On 07/08/2016 02:59, Domenico Mazzeo via TRNSYS-users wrote:
Dear all,
I am looking for simulate e photovoltaic system with battery and regulator and inverter.
Can you help me to connect them in order to avoid mistake?
Where I can find an example?
In my scheme the state of charge always increase without remain between 0 and 1.
Thank you
_______________________________________________ TRNSYS-users mailing list TRNSYS-users@lists.onebuilding.org http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-- *************************** David BRADLEY Principal Thermal Energy Systems Specialists, LLC 22 North Carroll Street - suite 370 Madison, WI 53703 USA P:+1.608.274.2577 F:+1.608.278.1475 d.bradley@tess-inc.com http://www.tess-inc.com http://www.trnsys.com