[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] Photovoltaic and battery



Domenico,

 If you are using the most recent version of TRNSYS (17.02.0005) then there is an example called ..\Trnsys17\Examples\PVT\PVT.tpf that includes a PV, a battery, a charge controller/inverter, and a load. Please note that if you are using Type47 for your battery model then there is an output called "state of charge," whose units are Ah (amp-hours) and that there is another output called "fractional state of charge." The fractional state of charge should not go much over 1 but the state of charge can. Please also note that the "state of charge" output is for one cell in the battery, not for the entire battery bank.

kind regards,

 David



On 07/08/2016 02:59, Domenico Mazzeo via TRNSYS-users wrote:

Dear all,
I am looking for simulate e photovoltaic system with battery and regulator and inverter.
Can you help me to connect them in order to avoid mistake?
Where I can find an example?
In my scheme the state of charge always increase without remain between 0 and 1.
Thank you



_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley@tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com