[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] Two instances of a type in one simulation



​Christian,
  I met almost the same problem two months ago, and I have solved hardly. I don't know how can I show you through email, if you could mail me your project and your PCM components to compare it with mine then to fix it for you. If there any problem with you PCM component, I'll make you know, if not I'll fix the problem the same way I've done.

Best regards,
Maroun NEMAR
Building performance engineer
Building Energy Analysis & Engineering
T: 0620548116
E: maroun.nemar@gmail.com
web site : www.bureauveritas.fr

2016-05-20 16:38 GMT+01:00 Christian Herløv Krintel <trnsys-users@lists.onebuilding.org>:
Dear TRNSYS users,
I have a multizone building model, where I want to use two PCM components (Type 399) to model the ceilings of two adjacent rooms.
When I run the simulation I noticed that the two components somehow share information. The PCM temperature is the same in both components.

I tried to switch the component order in the Control Cards, which changes the PCM temperature, but they are still equal.
How can I run two instances of a type side-by-side? Is this a limitation in how Type 399 was programmed?

Best Regards
Christian
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org