Badreddine,
Regarding your first problem, have you correctly define a heater (in heating type manager) in trnbuild?
For dealing with mask, you can have a look to that tutorial :
http://sel.me.wisc.edu/trnsys/downloads/tutorials_and_examples/connecting34_67.pdf
To define your shading scenarios, you can use schedules directly in trnbuild. If you want to define more complex scenarios, you will have to use an input in trnbuild and define scenario with an equation tool in studio, and connect it to type56.
Best regards
Adrien JEZEQUEL
Simulation Dynamique - Calculs numériques
62 rue du Bolliet
73230 SAINT-ALBAN-LEYSSE
Tél : +33(0) 479 750 029
Fax : +33(0) 479 852 122
a.jezequel@itf.biz
www.itf.bizLe 11/05/2015 11:44, Dalal Badreddine a écrit :
Hello!
I'm working on a simulation with TRNSYS and i have two problems :
The first is that when i run a simulation i have no sensible heat, it's always equal to zero.
The second is that i need to make shading scenarios and i don't know how to (i've been told i could use type 34 but it is still no clear to me)
Does anyone have an idea what i could do please?-
Badreddine Dalal
_______________________________________________ TRNSYS-users mailing list TRNSYS-users@lists.onebuilding.org http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org