Amr Alaaeldin Elesawy -
This is almost always caused by TRNSYS not finding the weather file after GenOpt has moved the files. Make sure your path for the file is the absolute path and not a relative path.
Regards,
Tim
---
Timothy P. McDowell Executive Vice President Thermal Energy System Specialists, LLC 22 N Carroll St, Suite 370 Madison, WI 53703 608-274-2577
On 2014-07-26 13:59, Amr Alaaeldin Elesawy wrote:
Dear users,I'm having a problem setting a series of simulations coupling GenOpt with Trnsys.I get the error in the attached files below...It is somehow related to the weather file, but I don't know what's the problem.When I simulate single TRNSYS cases (without Genopt), every thing works just fine, but as soon as I start with the GenOpt optimization, I get 4 error messages (they are all the same).I attached a screen shot from the Studio Model as well...Can someone please help me with this issue?Thank you,Regards,--Amr Alaaeldin Elesawy
PhD Student | Building EngineeringDepartment of Architecture, Built Environment and Construction Engineering (A.B.C.)
Politecnico di Milano, Italy+39 327 056 0018
_______________________________________________ TRNSYS-users mailing list TRNSYS-users@lists.onebuilding.org http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org