Dear users,
I’d like to know how to solve the following issue:
For some reason many adjacent walls are not recognized when loading the idf file in the trnsys wizard. I’ve seen the surfaces where the error “Adjacent wall not found” appears and I checked:
- Object info recognizes the wall as adjacent and boundary zone is correct
- On the matching surface recognition is OK as well
- Areas are equal
- Vertices are coincident
- The idf is written as described in the sketchup interface.
- The b17 file is the only where in those surfaces don’t appear something like “: ADJ_SURF=63 : BACK”
Not all adjacent surfaces had this problem but many do (62).
Could someone tell me how to make those walls getting recognized in trnsys?
Many thanks in advance,
Alexandre J. Freire
Investigador Científico / Research Engineer
Faculdade de Engenharia da Universidade do Porto
Departamento de Engenharia Mecânica
Secção de Fluidos e Calor
Rua Dr. Roberto Frias, Edif. L403
4200-465 Porto - Portugal
Tlf: +351 22 508 2264
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org