Dear users, I’d like to know how to solve the following issue: For some reason many adjacent walls are not recognized when loading the idf file in the trnsys wizard. I’ve seen the surfaces where the error “Adjacent wall not found” appears and I checked: - Object info recognizes the wall as adjacent and boundary zone is correct - On the matching surface recognition is OK as well - Areas are equal - Vertices are coincident - The idf is written as described in the sketchup interface. - The b17 file is the only where in those surfaces don’t appear something like “: ADJ_SURF=63 : BACK” Not all adjacent surfaces had this problem but many do (62). Could someone tell me how to make those walls getting recognized in trnsys? Many thanks in advance, Alexandre J. Freire Investigador Científico / Research Engineer Faculdade de Engenharia da Universidade do Porto Departamento de Engenharia Mecânica Secção de Fluidos e Calor Rua Dr. Roberto Frias, Edif. L403 4200-465 Porto - Portugal Tlf: +351 22 508 2264 |