Dear Trnsys Users,
We´re trying to simulate a large system, comprising 100+ units in TRNSYS16. We have already undergone a TrnsysConstants modifications to allow for sufficient output & equation numbers.
At this moment, the project gets simulated and Trnexe tells us that the simulation has been completed successfully. However, the output of the units we’ve checked are constant and equal to their initialization values
for all timesteps.
Any idea on this?
Thank you.
Roberto Garay Martinez
División Construcción Sostenible /
Sustainable Construction Division
TECNALIA
Parque Tecnológico de Bizkaia
C/Geldo s/n, Edificio 700
E-48160 Derio Bizkaia Spain
Tel.: +34 946 430 069
Mov.: +34 667 178 958
Fax: +34 946 460 900
http://www.linkedin.com/in/robertogaray
Este mensaje puede contener información confidencial o privilegiada. Si no eres el destinatario de este mensaje, notifícaselo por favor al remitente
y bórralo sin reenviarlo o guardarlo dado que está legalmente prohibido.
Mezu honek daukan informazioa isilpekoa edo pribilegiatua izan daiteke. Zuri zuzendua ez badago emaiozu, mesedez, horren berri igorleari eta ezaba ezazu bidali edo gorde gabe, legalki debekatua dago eta.
This message may contain confidential, proprietary or legally privileged information. If you are not the intended recipient of this message,
please notify it to the sender and delete without resending or backing it, as it is legally prohibited.
Por favor, piensa en el medio ambiente antes de imprimir este e-mail.
Mesedez pentsatu ingurugiroan e-mail hay imprimatu baino lehen.
Please, consider the environment before printing this e-mail.