[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TRNSYS-users] TRNSYS Message 427 - Type 15
Luis,
I am reasonably sure that the problem does not lie in Type15. When a
Type sends an error message to the messages() routine, it sends it own
Type number so if the Type number is incorrectly keyed into the calling
Type, it will appear to the end user as though the wrong Type generated
the error message. The last two arguments in the call to messages() are
the current Unit number and the current Type number.
As for the problem at hand, I think perhaps that you are using the
Trnsys16 coding standard. There should be a line in your component that
sets INFO(6) to the number of outputs that you need for your Type. You
will get this error if you reference an output greater than the number
of outputs that you reserved for Type. For example:
INFO(6) = 10
...
OUT(11) = someValue
Kind regards,
David
On 2/26/2014 13:56, LUIS J. CLAROS wrote:
Dear TRNSYS Users,
I get this error :
TRNSYS Message 427 : An OUTPUT from the specified component model
has been written to the global OUT array in a location beyond the
allocated number of outputs from this model. Please check the
component carefully to insure that INFO(6) is set correctly. The
simulation has been aborted to avoid problems caused by over-writing
the outputs from other component models Reported information : Not
available .
when I perform a simulation using Type 15-3 (EPW), Type 56 and a new
Type that I have developed, which makes use of the Type 15 outputs. It
looks like to be associated to Type 15 which seems odd.
I would really appreciate if anybody could help me to solve it.
Thanks in advance,
Luis
--
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI 53703 USA
P:+1.608.274.2577
F:+1.608.278.1475
d.bradley@tess-inc.com
http://www.tess-inc.com
http://www.trnsys.com