|
Abhay, I would recommend that you send your simulation project file (*.tpf) and building file (*.b17) as well as any other files necessary to run your simulation to your distributor. It is not really possible to diagnose the results without the input files. It is possible that the simulation is working correctly but that the equipment that is being commanded by the thermostat does not have enough heating or cooling capacity available to maintain the space temperature. Kind regards, David On 1/26/2014 22:47, Abhay Pratap Singh
wrote:
Hi Trnsys users, I had attached a Simple thermostat to a building and my puprpose is to controls the signal of fan coil unit. I am taking 23.5 deg C as a setpoint and deadband of 1 deg C. In the start of the simulation it works properly but in between of simulation it is not working. I am attaching an excel file of results which shows room air temperature and fan coil unit signal. So, please help me out. Thanks for any help in this regard. -- *************************** David BRADLEY Principal Thermal Energy Systems Specialists, LLC 22 North Carroll Street - suite 370 Madison, WI 53703 USA P:+1.608.274.2577 F:+1.608.278.1475 d.bradley@tess-inc.com http://www.tess-inc.com http://www.trnsys.com |