[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] Strange error with self-created components

Dear Mr. Lee,

In order for a programmers user's community to provide appropriate answers, it is always recommended to describe carefully the boundary conditions of the problem: (OS), version of the program, type and version of compiler used, version of eventually used external libraries, etc.
 
Having said this, I probably ran into the very same or similar problem trying to integrate a custom TRNSYS type I made myself with a third-party produced DLL.

After careful analysis I have concluded that this problem arises when the dynamic loader finds the TYPE DLL (the file exists), but the chain loading process fails (This can happen, in my case this was due to a problem in the third-party library linked to the type DLL).

It would be interesting to know if this is also your case.

Essentially this is a case of poor error reporting by TRNSYS: it could give to the user a more specific error message.

Sincerely,

_ _

Anton Soppelsa, Ph.D.

EURAC research
Institute for Renewable Energy
Via Luis-Zuegg 11, I-39100 Bolzano
t +39 0471 055 623
f +39 0471 055 699
anton.soppelsa @eurac.edu
www.eurac.edu

EURAC research
Legal Seat
Viale Druso 1, I-39100 Bolzano

This transmission is intended only for the use of the addressee and may contain confidential or legally privileged information. 
If you receive this transmission by error, please notify the author immediately by mail and delete all copies of this transmission and any attachments. 
Any use or dissemination of this communication is strictly prohibited by the "Privacy-Code", D.Lgs. 196/2003 and may lead to penal prosecution and liability for damages.

 Think before you print




  

-----Original Message-----
From: trnsys-users-bounces@cae.wisc.edu [mailto:trnsys-users-bounces@cae.wisc.edu] On Behalf Of C K Lee
Sent: Thursday, 24 October, 2013 10:24
To: Trnsys discussion group
Subject: [TRNSYS-users] Strange error with self-created components

Hello.

When I run a simulation with self-created component (Type237), I receive very strange error message (see attached file).  Message 49 says that
Type237 was found, but Message 73 says that Type237 could not be found.  
Can anyone advise how I can rectify the error?  Thank you!

Best Regards
LEE, Chun Kwong
City University of Hong Kong