[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] Trnsys and jEplus



Dear Yi Zhang,

I have the following error when I start a multicore simulation using a building model (type56) in trnsys.

Nevertheless, the simulations seem to be done. I now have to check in detail the results to be sure of it.

I would be really happy to test jEplus+EA for Trnsys, don't hesitate to send it if you wwant.

Best Regards,

Ewen


2013/10/8 Yi Zhang <YiZhang@dmu.ac.uk>

Dear Ewen, David,

 

Could you tell me a bit more about the problem? If a .b17 file is included into the .dck model using assign/include commands, jEPlus should be able to handle it. However, if it is specified in the .dck using a different syntax, jEPlus will probably run into trouble. In this case, and if you do not have parameters in the .b17 file, a workaround would be to use absolute path for the .b17 file, so all automatically generated models will point to the correct building description.

 

It would be useful if you can send me your models, the jEPlus project, and the TRNSYS 17 executable, so I can take a look at what exactly the problem is. Regarding jEPlus+EA, yes it should work with TRNSYS projects, but you will need a newer version. I will send you a link later. I am actually looking for TRNSYS users to test it. It will be very helpful if you are willing to try it.

 

Best regards,

 

Yi

 

From: trnsys-users-bounces@cae.wisc.edu [mailto:trnsys-users-bounces@cae.wisc.edu] On Behalf Of CHEZE David 227480
Sent: 08 October 2013 08:16
To: TRNSYS users mailing list at the Solar Energy Lab, UW-Madison
Subject: Re: [TRNSYS-users] Trnsys and jEplus

 

Hi Ewen,

About multicore simulations I’d the same experience and no user solution. From recent discussion with JEplus developers I’ve heard that JEplus+EA should work with trnsys as well but I’ve not tested up to now.

 

David

 

 

De : trnsys-users-bounces@cae.wisc.edu [mailto:trnsys-users-bounces@cae.wisc.edu] De la part de ewen raballand
Envoyé : lundi 7 octobre 2013 19:10
À : trnsys-users@cae.wisc.edu
Objet : [TRNSYS-users] Trnsys and jEplus

 

Hello,

I'm starting to use jEplus for parametric simulation with Trnsys. It works well but I'm not able to use more than one core... So no parallel job is possible and the reason seems to be a simultaneous  acces to the b17 file.

Does anyone has a solution to this problem ?

By the way, I was wondering if jEplus+EA could be used with Trnsys ?

Best regards,

Ewen


_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@cae.wisc.edu
https://mailman.cae.wisc.edu/listinfo/trnsys-users