Another option is to calculate the values of each layer by your own. You only need both surface (wall inside/outside surface) temperatures and the heat conductivity of each layer. Export these values in an excel file and calculate the values for each timestep. Where is the Problem? Von: trnsys-users-bounces@cae.wisc.edu [mailto:trnsys-users-bounces@cae.wisc.edu] Im Auftrag von hotline Dear Ahmed, With the TYPE 56 you are just able to get the surface temperatures. It would be possible to calculate inner wall temperatures with TYPE 399 for PCM - Phase change materials in passive and active wall constructions. Best __________________________________________________________________________________________________ Jochen Lam TRNSYS Software Team
Curiestraße 2 70563 Stuttgart Fax: +49 711 67976-11 Web: www.trnsys.de Von: trnsys-users-bounces@cae.wisc.edu [mailto:trnsys-users-bounces@cae.wisc.edu] Im Auftrag von Ahmed Khoja Dear Trnsys users, I am modeling a massive roof (over a 1 m thick) that is constructed of different layers each have a varying thickens and thermal properties. My question on you is: is there any way or any special type available out there that would allow me to read the temperature of wall layers or the temperature of the wall at varying depths! not only the wall inside/outside surface temperature Your help is highly appreciated Best Ahmed |