[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] Problem with shading matrice



Jean-Francois,

 

I doubt that the total number is the issue.

It is more likely that the window on wall surface 733 there occurs for a certain sun position an error causing TRNBuild to stop.

If you send the project to hotline@transsolar.com we may have a closer look at it.

 

Marion

 

 

 

Dipl.-Ing. Marion Hiller
TRANSSOLAR: KlimaEngineering - Technologien für energieeffizientes Bauen und Nutzerkomfort in Gebäude 
Munich - New York - Stuttgart + 49.711.67976.0

Transsolar Energietechnik GmbH, Curiestrasse 2, 70563 Stuttgart 
Amtsgericht Stuttgart - HRB 23347, Steuernummer 99073/00911, USt-IdNr.: DE152272639

Geschäftsführer: Dipl.Ing. Matthias Schuler, Dipl.Ing. Thomas Auer, Dipl.Phys. Stefan Holst, Prof. Dipl.-Ing. Bleicher 

 

 


Von: trnsys-users-bounces@cae.wisc.edu [mailto:trnsys-users-bounces@cae.wisc.edu] Im Auftrag von Jean-François Maissin
Gesendet: Dienstag, 12. März 2013 15:38
An: trnsys-users@cae.wisc.edu
Betreff: [TRNSYS-users] Problem with shading matrice

 

Hello,

 

I have a problem to generate a shading matrix on TRNBUILD from a Sketchup 3D model. Once the generation of the matrix on TRNBUILD launched, the program runs for several minutes before leaving TRNBUILD with no particular message. SHD file does not end correctly compare to a generated file with a success message. Is it possible that the number of elements in the shading model is limited? I have about 600 elements of shading in the IDF file (and the 3D model of course).

 

 

Thank you in advance for your answer!

 

______________________
Ing. Jean-François Maissin
Ingénieur de Projets


 

 

NOUVELLE ADRESSE !

 

NEO&IDES sprl

Liege Science Park - Sart-Tilman
Rue des Chasseurs Ardennais, 3
B-4031 Liège

Belgium

Fixe : 04/366.00.17

GSM : 0499/10.78.21