[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] Starting point storage tank type 4

When you say empty I am assuming you mean thermally "empty" and not starting from a dry tank. Assuming you mean thermally empty, just set the values in the derivatives tab of the proforma of the tank to your desired startup condition. If you meant dry start, then you'll have to use a different model - try Type 39. 

Jeff

---
<p>Jeff Thornton</p>
<p><em>President - TESS LLC</em></p>
<p><em>22 N. Carroll Street, Madison WI USA 53703</em></p>
<p><em>Office: (608) 274-2577&nbsp; Fax: (608) 278-1475</em></p>
<p><em>www.tess-inc.com</em></p>
<p><em>E-Mail: thornton@tess-inc.com</em></p>
<p>&nbsp;</p>

On 01/18/2013 2:44 pm, Michael Diekerhof wrote:

Dear all,

is there an opportunity to start with an empty tank !? The tank is
always on a certain temperature if i start the simulation (e.g 50°C)
and the heat pump that is connected to type 4 only starts working
after a certain time period (Type 2Controllers). Is there a chance to
simulate that i start with heating up the storage ?

Best,
Michael
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@cae.wisc.edu
https://mailman.cae.wisc.edu/listinfo/trnsys-users