[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] Probleme with type.460 : Earth to air heat exchanger ( EAHX)



Dear Mr. Hassan,
  Is the Type460 that you are using part of the TRNDll or is it compiled in an external DLL? If you don't know then check your ..\Trnsys16\UserLib\DebugDLLS\ and ..\Trnsys16\UserLib\ReleaseDLLS\ directory for something called ***460***.dll. If I were to guess, I think that Type460 is compiled into a very old version of the Trnsys16 TRNDll, one that does not recognize the keyword "TIME_REPORT." I cannot be certain though. If that were true, I would think that you would not be able to run any input files. To fix the problem, you would need to get the last version of Trnsys16 that was released and you would need to obtain a Type460 install that did not replace the TRNDll but which contains its own DLL. If you can send me the *.dck file that the Simulation Studio is producing, it might give me some more ideas.
Kind regards,
 David
 


On 11/10/2012 05:46, hassan bouhess wrote:
Hello Mr David,
 You will find Attached the file*lst and file*log.

thank you for your help.
Best
Hassan

2012/11/9 David BRADLEY <d.bradley@tess-inc.com>
Hassan,
  Please send me the *.lst file that is generated when you run the simulation and I'll see if I can find the problem.
Best,
 David


On 11/9/2012 10:11, hassan bouhess wrote:
Dear all,
Whene i simulate the Type.460 in TRNSYS.16, i have this probleme in the lesting file, the probleme is  i don't understand what means :

** Fatal Error at time   :         0.000000

    Generated by Unit     : Not applicable or not available

    Generated by Type     : Not applicable or not available

    TRNSYS Message     48 : The TRNSYS processor has reported that an unrecognized control card was found while trying to read the input file.  This error can be caused by underspecifying a required number of items in the input file.  For example, specifiying only 9 parameters after a "PARAMETERS 10" card has been read can cause this error. The line that caused this error is listed in the reported information below.

    Reported information  : TIME_REPORT

 

*** Fatal Error at time   :         0.000000

    Generated by Unit     : Not applicable or not available

    Generated by Type     : Not applicable or not available

    Message               : Errors found while processing the TRNSYS input file.


Has anyone had this problem before?

I am very thankful for any suggestions how to solve this probleme. I have no other ideas so far.


Best

Hassan



_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@cae.wisc.edu
https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley@tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com


-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley@tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com