[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[TRNSYS-users] Question active layer in type 56

To: "TRNSYS-users@engr.wisc.edu" <TRNSYS-users@engr.wisc.edu>
Subject: [TRNSYS-users] Question active layer in type 56
From: Richard Thygesen <richard.thygesen@mdh.se>
Date: Tue, 15 May 2012 08:48:04 +0200
Accept-language: sv-SE, en-US
Acceptlanguage: sv-SE, en-US
List-archive: <http://mailman.cae.wisc.edu/pipermail/trnsys-users>
List-help: <mailto:trnsys-users-request@cae.wisc.edu?subject=help>
List-id: "TRNSYS users mailing list at the Solar Energy Lab, UW-Madison" <trnsys-users.cae.wisc.edu>
List-post: <mailto:trnsys-users@cae.wisc.edu>
List-subscribe: <https://mailman.cae.wisc.edu/listinfo/trnsys-users>, <mailto:trnsys-users-request@cae.wisc.edu?subject=subscribe>
List-unsubscribe: <https://mailman.cae.wisc.edu/options/trnsys-users>, <mailto:trnsys-users-request@cae.wisc.edu?subject=unsubscribe>
Thread-index: Ac0yZq2GRdL6FqmZT7aA2tAtx0O0bA==
Thread-topic: Question active layer in type 56

Hi.

Have any of you out there had problem with controlling an active layer in type 56?

I have connected the active layer to a GSHP system but the indoor temperature rise sharply when the controller turns the GSHP off and return to a “normal” 20°C when the GSHP starts again. Is the active layer incapable of handle a no flow situation?

Does anyone know what the problem might be?

Best regards

Richard Thygesen

Doctoral student

Mälardalen University

School of Sustainable Development of Society and Technology

Phone: +46(0)21-10 31 82

richard.thygesen@mdh.se

www.mdh.se

Follow-Ups:
- Re: [TRNSYS-users] Question active layer in type 56
  - From: David BRADLEY <d.bradley@tess-inc.com>

Prev by Date: Re: [TRNSYS-users] (bez temata)
Next by Date: [TRNSYS-users] NON-SYMMETRIC ADJACENT WALLS
Previous by thread: [TRNSYS-users] (bez temata)
Next by thread: Re: [TRNSYS-users] Question active layer in type 56
Index(es):
- Date
- Thread