Re: [TRNSYS-users] Absorption chiller

[David BRADLEY <d.bradley@tess-inc.com>]

Mayank,
 Without seeing your project, it is very difficult to tell what might be going wrong. Some possible causes are a controls problem (pumps and chillers not turning off when they should) or a thermal capacitance problem. I would recommend that you send your *.tpf (and any other files needed to run the system) to your distributor for assistance.
Kind regards,
 David


On 11/23/2011 23:02, Mayank Bhatnagar wrote:

Dear all,

I used absorption chiller of 30 kW with solar flat plate collector 80 m²  area using weather file of Delhi. When I simulate it the hot water tank temperature reaches negative value upto 100 ⁰ C and chilled water tank reach about 100⁰ C. the chiller is working properly for 8 kW load only. What is the cause of this problem.

Thank you.

 

 

Mayank Bhatnagar

M.Tech. (Energy Engineering)

Malaviya National Institute of Technology,

Jaipur (INDIA)

contact no.- +91-9983816468

 

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@cae.wisc.edu
https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley@tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com