|
As regarding the UNIT=TYPE (INFO(1) = INFO(2)) it is
solved. But the mixing problem still exist Hi I have create a new type on TRNSYS 16 for my phd
thesis, that simulates. I want this type to be able to have more than on
instances on the same simulation So I have followed the programming manual and I have
add a part that controls if UNIT=TYPE (INFO(1) = INFO(2)) and if not it re
reads the PARAMETER. The way that I have create the new type is the black
box technique. I give input and parameter and I get output. To be able to calculate the results I have to store
at the end of each time step some variables to the trnsys and retrieve them at
the start of next time step. The first problem that I have is that the INFO(1) and
INFO(2) have value = 0 and the type cannot reread the parameters! And my second problem is that I have noticed that
these stored variables are mixed between the two instances of my type on the
same time step. To store the variables I am using the CALL setStorageVars(LocalSave,NITEMS,INFO) And to retrive them CALL getStorageVars(LocalSave,NITEMS,INFO) Could someone help me on how I can solve these
problems ? Thank you in advanced Regard Kordou |