Re: [TRNSYS-users] Questions about the fan-coil unit in a heating or cooling system

[David BRADLEY <d.bradley@tess-inc.com>]

Chen,
 If you have access to the TessLibs17, you can use Type987 (four-pipe fan coil in the HVAC library). If you have the TessLibs v2 then there is only a 2-pipe (heating) fan coil - Type664 but you can assemble a fan coil using a heating coil model, a cooling coil model, and a fan.
Regards,
 David


On 11/23/2010 07:45, CHEN Xi wrote:

Dear users:

 

I tried to simulate a heating device with a water-to-water heat pump, and would like to find a fan-coil unit model in TRNSYS library as the heating terminal connected to the load side of the water-to-water heat pump. Could anyone recommend a type to me to simulate the performance of a fan-coil unit. Thank you very much!

 

Sincerely,

 

CHEN

 

2010-11-23

---

CHEN Xi

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@cae.wisc.edu
https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley@tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com