[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TRNSYS-users] Exporting surface data on Trnsys3d
Hi Rémy,
this sounds like it doesn't find the link between data and surfaces.
This can have two reasons:
- the ***_b17.idf has to be used in order to visualize the results.
There the surfaces have the same surfaceID's as in TRNBUILD
- the initial value in the Trnsys3d Printer in the simulation Studio are
not the same as the surfaceID's in TRNBUILD or the ***_b17.idf. These
initial values are used to generate the link to the surface numbers in
the 3D geometry.
Christian
TRANSSOLAR Software Team
hotline@transsolar.com
www.trnsys.de
Transsolar KlimaEngineering - Technologien für energieeffizientes Bauen
und Nutzerkomfort in Gebäuden
Transsolar Energietechnik GmbH, Curiestrasse 2, 70563 Stuttgart /
Amtsgericht Stuttgart - HRB 23347 / USt-IdNr.: 99073/00911
Geschäftsführer: Dipl.Ing. Matthias Schuler, Dipl.Ing. Thomas Auer,
Dipl.Phys. Stefan Holst, Prof. Volkmar Bleicher
-----Ursprüngliche Nachricht-----
Von: Rémy Saulnier [mailto:remy_saulnier@holisud.fr]
Gesendet: Mittwoch, 27. Oktober 2010 15:19
An: trnsys-users@cae.wisc.edu
Betreff: [TRNSYS-users] Exporting surface data on Trnsys3d
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@cae.wisc.edu
https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users