[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] Changing properties of air in a single room?



Alasdair,
 I would recommend using an actual tank model; there are three vertically cylindrical tank models in the TRNSYS standard library, one of which allows the volume of liquid in the tank to vary with time. There are horizontally and vertically cylindrical, spherical, and rectangular models in the TESS Library. It is a bit harder to deal with open tanks; the best bet there might be to look at using the Transsolar pool model although it neglects energy loss from the sides of the pool.
regards,
 david

On 9/20/2010 03:50, Alasdair Douglas wrote:

Dear All,

 

We are looking in to a project for which we need to model tanks of liquid (probably oil) within a space and calculate the heating required to keep the oil at a set temperature. Would it be possible to model this tank as a room? Is there a way that the properties of the air in a room could be changed to that of oil while any surrounding spaces would have normal air properties? Or do you think a more simplistic model would be more appropriate?

 

Thanks in advance,

 

Aly

 

_______________________________________________ TRNSYS-users mailing list TRNSYS-users@cae.wisc.edu https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
bradley@tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com