[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] TRNSYS-users Digest, Vol 69, Issue 4


Dear Luis,

The problem you are asking about can be solved by connecting inputs and outputs in type 56. (externally to the building definition).
If you want to connect them in series, you should output the active layer outlet temperature and connect it to an input to use it as inlet temperature for the second wall.

I hope this helps.

Best regards.

Roberto.

----- Mensaje de "Claros Marfil, Luis Jesus" <Centag51@acciona.es> en Fri, 3 Sep 2010 12:15:25 +0200 -----
Para:
"trnsys-users@cae.wisc.edu" <trnsys-users@cae.wisc.edu>
Asunto:
[TRNSYS-users] Connecting two active walls

Hi TRNSYS users,
 
I’m using Type56, and I would need to connect two active layers in different walls of the same building. Is there any way to connect the pipes of both layers ?
 
Any help is appreciated.

--------------------------------------------------------------------------
Roberto Garay Martinez
Labein-Tecnalia
Unidad de Construcción y Desarrollo del Territorio
c/Geldo. Parque Tecnológico de Bizkaia
Edificio 700
48160 Derio (Bizkaia)
Tel.: 34 94 607 33 00
Fax: 34 94 607 33 49
www.labein.es
---------------------------------------------------------------------------
Visite nuestro blog:
http://www.energiaenedificacion.com
--------------------------------------------------------------------------