[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] TRNSYS-users Digest, Vol 67, Issue 61

Hi, Everyone!
 

Thanks a lot in advance! 
 
I have some questions about TRNSYS:
 
1. About TRNSYS Building Description File: Where is it? How can i find it?
 
2.About TYPE's Output tab: Why some subjects have Value, some have Value 0? Doesn't it have Value after running? Or basically it has Output Value?
 
3.Why Ambient Temperature isn't equal to Ventilation Air Temperature?
 
4. What's meaning of "Qequipment (Heat Transfer Rates of Zone Equipment)=-2.00E+04" ?Can it be negative?  
 
5. What's meaning of Heat Transfer Rates? What's the relationship between Heat Transfer Rates and Energy Saving or Efficiency? Is it right that the smaller(0 or Negative) the Value of Heat Transfer Rates is, the better the Energy Saving or Efficiency is?
 
6. Which Type can calculate or compare the  energy consumption?
 
7. About the Equation: Whether is it similar to the Fortran Programming or not? How to master the Equation Programming?
 
Br.
 
wang
 

2010/7/27 <trnsys-users-request@cae.wisc.edu>
Send TRNSYS-users mailing list submissions to
       trnsys-users@cae.wisc.edu

To subscribe or unsubscribe via the World Wide Web, visit
       https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
or, via email, send a message with subject or body 'help' to
       trnsys-users-request@cae.wisc.edu

You can reach the person managing the list at
       trnsys-users-owner@cae.wisc.edu

When replying, please edit your Subject line so it is more specific
than "Re: Contents of TRNSYS-users digest..."

Today's Topics:

  1. Re: TRNSYS-users Digest, Vol 67, Issue 59 (ghetu mariana)
  2. trnsys 3d plugin error (Abdulhameed Mambo)


---------- 已转发邮件 ----------
From: ghetu mariana <ghetu_mariana@yahoo.co.uk>
To: trnsys-users@cae.wisc.edu
Date: Tue, 27 Jul 2010 00:18:19 +0000 (GMT)
Subject: Re: [TRNSYS-users] TRNSYS-users Digest, Vol 67, Issue 59
Pedro,

You need to open TRNBuild first in order to open your  "project.bui". Otherwise you won't be able to do it.

Best regards,
Mariana

From: "trnsys-users-request@cae.wisc.edu" <trnsys-users-request@cae.wisc.edu>
To: trnsys-users@cae.wisc.edu
Sent: Mon, 26 July, 2010 11:10:57
Subject: TRNSYS-users Digest, Vol 67, Issue 59

Note: Forwarded message is attached.

Send TRNSYS-users mailing list submissions to
    trnsys-users@cae.wisc.edu

To subscribe or unsubscribe via the World Wide Web, visit
    https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
or, via email, send a message with subject or body 'help' to
    trnsys-users-request@cae.wisc.edu

You can reach the person managing the list at
    trnsys-users-owner@cae.wisc.edu

When replying, please edit your Subject line so it is more specific
than "Re: Contents of TRNSYS-users digest..."
Today's Topics:

  1. Re: Problem opennig "TRNSYS Building Description    File" out of
      TRNBuild... (rgaray@labein.es)
  2. Re: Problem opennig "TRNSYS Building Description File"    out of
      TRNBuild... (Claros Marfil, Luis Jesus)
  3. Re: Problem opennig "TRNSYS Building Description File"    out of
      TRNBuild... (thiemann.stefan@vdi.de)
  4. Dessicant Cooling (Julie Lestrade)
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@cae.wisc.edu
https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users

Dear Pedro,

I have also found that bug in trnbuild. This only happens when you try to open a file directly in the windows explorer.
At least for me, the following sequence works properly:
1. open TRNBUILD
2. Open a file using the Open function/button in trnbuild

Best regards,

Roberto

--------------------------------------------------------------------------
Roberto Garay Martinez
Labein-Tecnalia
Unidad de Construcción y Desarrollo del Territorio
c/Geldo. Parque Tecnológico de Bizkaia
Edificio 700
48160 Derio (Bizkaia)
Tel.: 34 94 607 33 00
Fax: 34 94 607 33 49
www.labein.es
---------------------------------------------------------------------------
Visite nuestro blog:
http://www.energiaenedificacion.com
--------------------------------------------------------------------------
----- Mensaje de Pedro Gonçalves <pgoncalves.pt@gmail.com> en Fri, 23 Jul 2010 18:35:34 +0100 -----
Para:
 <trnsys-users@cae.wisc.edu>
Asunto:
 [TRNSYS-users] Problem opennig "TRNSYS Building Description File" out of TRNBuild...

Dear All,
 
When I´m trying to open "TRNSYS Building Description File" out of TRNBuild, appear a window with the following message: c:\program not found.
I believe that is a problem of path definition in some place!!!
 
Anyone knows how can I fix it?
 
Thanks in advance.
Regards,
Pedro Gonçalves

Hello Pedro,

 

I think you should check the path of the “Building description file (*.bui)” in the “External Files” tab of the Type that you are using.

 

Hope this help.

 

Regards,

 

Luis J. Claros

De: Pedro Gonçalves [mailto:pgoncalves.pt@gmail.com]
Enviado el: viernes, 23 de julio de 2010 19:36
Para: trnsys-users@cae.wisc.edu
Asunto: [TRNSYS-users] Problem opennig "TRNSYS Building Description File" out of TRNBuild...

 

Dear All,

 

When I´m trying to open "TRNSYS Building Description File" out of TRNBuild, appear a window with the following message: c:\program not found.

I believe that is a problem of path definition in some place!!!

 

Anyone knows how can I fix it?

 

Thanks in advance.

Regards,

Pedro Gonçalves 

Este mensaje se dirige exclusivamente a su destinatario, y puede contener información confidencial sometida a secreto profesional, o cuya divulgación esté legalmente prohibida. Cualquier opinión en él contenida es exclusiva de su autor y no representa necesariamente la opinión de la empresa. Si ha recibido este mensaje por error, le rogamos nos lo comunique de forma inmediata por esta misma vía y proceda a su eliminación, así como a la de cualquier documento adjunto al mismo. El correo electrónico vía Internet no es seguro y no se puede garantizar que no haya errores ya que puede ser interceptado, modificado, perdido o destruido, o contener virus. Cualquier persona que se ponga en contacto con nosotros por correo electrónico se considerará que asume estos riesgos.


This e-mail is addressed exclusively to the recipient and may contain privileged information under a professional confidential agreement or it may be against the law to
 disclose its contents. Any opinion contained in it belongs exclusively to his/her author and does not necessarily reflect the company’s view. If you receive this e-mail in error, please let us know immediately (by return e-mail) and proceed to its destruction, as well as any document attached to it. The sending of e-mails through the Internet is not safe and, therefore, error-free communications cannot be guaranteed, as they can be intercepted, changed, misled or destroyed or they might contain a virus. Any user contacting us through e-mails shall be understood to be assuming these risks.
Hello,

I think the problem is that Trnsys is based on Fortran and I
discovered that it doesnt work properly if there is a space in the
path. For example if your files are on the desktop you cant directly
open the file.

Best, Stefan


-------------
Hello Pedro,

I think you should check the path of the "Building description file
(*.bui)" in the "External Files" tab of the Type that you are using.

Hope this help.

Regards,

Luis J. Claros
________________________________
De: Pedro Gonçalves [mailto:pgoncalves.pt@gmail.com]
Enviado el: viernes, 23 de julio de 2010 19:36
Para: trnsys-users@cae.wisc.edu
Asunto: [TRNSYS-users] Problem opennig "TRNSYS Building Description
File" out of TRNBuild...

Dear All,

When I´m trying to open "TRNSYS Building Description File" out of
TRNBuild, appear a window with the following message: c:\program not
found.
I believe that is a problem of path definition in some place!!!

Anyone knows how can I fix it?

Thanks in advance.
Regards,
Pedro Gonçalves



Este mensaje se dirige exclusivamente a su destinatario, y puede
contener información confidencial sometida a secreto profesional, o
cuya divulgación esté legalmente prohibida. Cualquier opinión en
él contenida es exclusiva de su autor y no representa necesariamente
la opinión de la empresa. Si ha recibido este mensaje por error, le
rogamos nos lo comunique de forma inmediata por esta misma vía y
proceda a su eliminación, así como a la de cualquier documento
adjunto al mismo. El correo electrónico vía Internet no es seguro y
no se puede garantizar que no haya errores ya que puede ser
interceptado, modificado, perdido o destruido, o contener virus.
Cualquier persona que se ponga en contacto con nosotros por correo
electrónico se considerará que asume estos riesgos.

This e-mail is addressed exclusively to the recipient and may contain
privileged information under a professional confidential agreement or
it may be against the law to disclose its contents. Any opinion
contained in it belongs exclusively to his/her author and does not
necessarily reflect the company’s view. If you receive this e-mail
in error, please let us know immediately (by return e-mail) and
proceed to its destruction, as well as any document attached to it.
The sending of e-mails through the Internet is not safe and,
therefore, error-free communications cannot be guaranteed, as they
can be intercepted, changed, misled or destroyed or they might
contain a virus. Any user contacting us through e-mails shall be
understood to be assuming these risks.








Dear Trnsys Users,

I was wondering if anyone has been trying to simulate a dessicant cooling installation ? Is there any tool very useful in the TESS library (I don't have access to a lot yet, since I could manage without them but who knows ...)

thank you for any feedbacks on that subject,

Best regards,
Julie

Julie LESTRADE
Ingénieur d'études

CEDRE
Ophira 1, 1 Place Bermond
06560 SOPHIA-ANTIPOLIS
Tel : 04 92 96 03 77
Port : 06 45 68 07 53





---------- 已转发邮件 ----------
From: Abdulhameed Mambo <A.D.Mambo@lboro.ac.uk>
To: "trnsys-users@cae.wisc.edu" <trnsys-users@cae.wisc.edu>
Date: Tue, 27 Jul 2010 12:23:33 +0100
Subject: [TRNSYS-users] trnsys 3d plugin error

I have been recieving this error messages whenever I attempted using trynsys 3d plugins. I wish to be helped.

 

 

Sorry...the plugin has encountered an error.  This error may cause unpredictable behavior in the plugin--continue this session with caution!  It would probably be a good idea to exit SketchUp and start again.

 

For help, please contact hotline@transsolar.com, browse the list of known issues in the bug tracker, or post a new bug report.

 

When reporting a bug, please include the error message and backtrace below (scroll down):

 

ERROR:

NoMethodError

undefined method `reduce' for #<Array:0x11d0e148>

 

BACKTRACE:

C:/Program Files/Google/Google SketchUp 7/Plugins/Trnsys3d/lib/interfaces/DrawingUtils.rb:18:in `detect_base_face'

C:/Program Files/Google/Google SketchUp 7/Plugins/Trnsys3d/lib/interfaces/BaseSurface.rb:173:in `face_polygon'

C:/Program Files/Google/Google SketchUp 7/Plugins/Trnsys3d/lib/interfaces/BaseSurface.rb:172:in `each'

C:/Program Files/Google/Google SketchUp 7/Plugins/Trnsys3d/lib/interfaces/BaseSurface.rb:172:in `face_polygon'

C:/Program Files/Google/Google SketchUp 7/Plugins/Trnsys3d/lib/interfaces/Surface.rb:107:in `update_input_object'

C:/Program Files/Google/Google SketchUp 7/Plugins/Trnsys3d/lib/interfaces/BaseSurface.rb:93:in `update_input_object'

C:/Program Files/Google/Google SketchUp 7/Plugins/Trnsys3d/lib/interfaces/DrawingInterface.rb:219:in `create_from_entity'

C:/Program Files/Google/Google SketchUp 7/Plugins/Trnsys3d/lib/interfaces/DrawingInterface.rb:206:in `new_from_entity'

C:/Program Files/Google/Google SketchUp 7/Plugins/Trnsys3d/lib/observers/SurfaceGroupEntitiesObserver.rb:52:in `onElementAdded'

C:/Program Files/Google/Google SketchUp 7/Plugins/Trnsys3d/lib/observers/SurfaceGroupEntitiesObserver.rb:23:in `initialize'

C:/Program Files/Google/Google SketchUp 7/Plugins/Trnsys3d/lib/AsynchProc.rb:14:in `call'

C:/Program Files/Google/Google SketchUp 7/Plugins/wxSU/lib/wxruby/lib/wx/classes/evthandler.rb:133:in `acquire_handler'

C:/Program Files/Google/Google SketchUp 7/Plugins/wxSU/lib/wxruby/lib/wx/classes/evthandler.rb:133:in `call'

(eval):960:in `notify'

(eval):960

 

 

 

 

Thank you.

Mambo D A


_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@cae.wisc.edu
https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users