[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] coupling air throw windows



Laia,
 You can define the coupling air flow in whatever way you like. As long as there is an adjacent surface between two zones (whether a wall or a window) you can define some air movement through that surface. You could have all the coupling air go through the wall, all of it go through the window, or you could split it in whatever proportion you like. The total air flow from one zone to the other is going to be the sum of all the individual air flows.

 Also keep in mind that if you define air flow in one direction (zone A to zone B for example) this does NOT mean that there is a corresponding amount of air assumed to flow from zone B back to zone A; you must specify that separately.
Best,
 David

On 7/6/2010 07:32, Laia Cases - iMat wrote:
Hi trnsys users,

in adjacent wall, you can define coupling air throw wall and window, if the wall has a window. If there is coupling air throw window, I understand it is not necesary to define it in wall, only in window. Am I right?

Laia
--
Laia Cases
Unitat de Condicionament Tèrmic
iMat - Centre Tecnològic de la Construcció
lcases@imat.cat
www.imat.cat

Wellington 23  ·   E-08018 Barcelona
T +34 93 553 97 95
F +34 93 553 97 96
Imprimiu aquest document només si és necessari

_______________________________________________ TRNSYS-users mailing list TRNSYS-users@cae.wisc.edu https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
bradley@tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com