[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[TRNSYS-users] Strange part-load data for Type655



Hello.

I find that the sample part-load data for Type655 (air-cooled chiller) as shown
below seems very strange.

0.0  0.25  0.50  0.75  1.00	           ! Part Load Ratio
0.0000			           ! Fraction of Full Load Power at PLR=0.00
0.0902			           ! Fraction of Full Load Power at PLR=0.25
0.3241			           ! Fraction of Full Load Power at PLR=0.50
0.6262			           ! Fraction of Full Load Power at PLR=0.75
1.0000			           ! Fraction of Full Load Power at PLR=1.00

The fraction of full load power appears to be unreasonably small, especially
when the PLR is less than 0.5.  By applying the above part-load data, the
calculated COP becomes very large at low PLR.  Does anyone have another set of
data that can be shared?  Thank you!

Best Regards
LEE, Chun Kwong
Division of Building Science and Technology
City University of Hong Kong