|
Hello Mr. Dimitris!
In the Buildung Type56 output (NType) 58 is the
fluid-Outlet-Temperature.
In the Building Type You can define the inlet-temperature and
the massflow or set them as an input.
You may use an "itterative feedback controller" to control one
of this two parameters in that way to achieve a certain
outlet-temperature.
Did I understand Your question
correct?
With kind regards,
Matthias Kersken
---
|
Dipl.-Ing. Matthias
Kersken
Wissenschaftlicher
Mitarbeiter / Abteilung Energiesysteme
Fraunhofer-Institut für
Bauphysik
Institutsteil Holzkirchen
Fraunhoferstraße
10
83626 Valley
eMail: Matthias.Kersken@ibp.fraunhofer.de
Telefon
08024 / 643-204
Telefax 08024 / 643-366
www.ibp.fraunhofer.de |
|
|
Dipl.-Ing. Matthias Kersken
Research Associate / Department Energy Systems
Fraunhofer Institute for Building Physics
Branch
Holzkirchen
Fraunhoferstraße 10
D-83626 Valley
eMail: Matthias.Kersken@ibp.fraunhofer.de
Phone +49 8024 / 643-204
Fax +49 8024 /
643-366
www.ibp.fraunhofer.de |
|
---
Hi all, In this kind of applications i have noticed from the various posts, that TRNSYS doesn't offer enough information i.e the fluid outlet temperature of the water.If so, how can someone define this information or the cooling capacity of the panel?I hope someone can shed some light to this problem! Thanks in advance, Xevgenos Dimitris
National Technical University Of Athens
School of Mechanical Engineering
Thermal Section
|