|
Hello everybody, I'm passing a ventilation stream in my type 56 zone in Simulation studio (after have put temperature, flowrate and RH as inputs in TRNBuild). I am passing the flowrate in type 92 to cool it. And I would like to watch the zone temperature and control it with an PID controller type 23. But the type 92 have a control function as input and not a cooling rate. So, is it possible to put a maximum cooling rate in the parameter of type 92 and connect the control signal from type 23 to type 92 control function (in the type 23 parameter i have put a control signal varying between 0 and 1) to control the temperature? Or is there other solution to cool the air with a PID controller? Best regards Guy THOMAS Etudiant CNAM Paris Télécharger en toute sécurité sur Internet ? La solution avec Internet Explorer 8 |