[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[TRNSYS-users] type31 Pipe Error

To: "trnsys-users@cae.wisc.edu" <trnsys-users@cae.wisc.edu>
Subject: [TRNSYS-users] type31 Pipe Error
From: Fred Betz <fbetz@aeieng.com>
Date: Mon, 15 Mar 2010 14:28:05 -0500
Accept-language: en-US
Acceptlanguage: en-US
List-archive: <https://www-old.cae.wisc.edu/pipermail/trnsys-users>
List-help: <mailto:trnsys-users-request@cae.wisc.edu?subject=help>
List-id: "TRNSYS users mailing list at the Solar Energy Lab, UW-Madison" <trnsys-users.cae.wisc.edu>
List-post: <mailto:trnsys-users@cae.wisc.edu>
List-subscribe: <https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users>, <mailto:trnsys-users-request@cae.wisc.edu?subject=subscribe>
List-unsubscribe: <https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users>, <mailto:trnsys-users-request@cae.wisc.edu?subject=unsubscribe>
Thread-index: AcrEdaLLNt9zmCf/QYG9nFEO4af8ig==
Thread-topic: type31 Pipe Error

I received the following error which I have never seen before about Type31.

TRNSYS Message 427: An OUTPUT from the specified component model has been written to the global OUT array in a location beyond the allocated number of outputs from this model. Please check the component carefully to insure that INFO(6) is set correctly. The simulation has been aborted to avoid problems caused by over-writing the outputs from other component models.

Reported information: No available.

Anyone have any thoughts on how to address this.

Thanks,

Fred

Fred Betz PhD., LEED AP
Sustainable Systems Analyst

AEI | AFFILIATED ENGINEERS, INC.
5802 Research Park Blvd. | Madison, WI 53719

P: 608.236.1175 | F: 608.238.2614
fbetz@aeieng.com | www.aeieng.com

Prev by Date: [TRNSYS-users] pcm with finite difference method
Next by Date: Re: [TRNSYS-users] pcm with finite difference method
Previous by thread: [TRNSYS-users] pcm with finite difference method
Next by thread: [TRNSYS-users] Combined solar system
Index(es):
- Date
- Thread