Hi Nicola
Your question is interesting, as I am a regular user of this
Type, and I noticed that changing the value of this parameter has barely no
influence on the simulation, i.e. even if you are simulating over a 10-year
period, entering 1 or 10 seem to make no difference at all.
This is what I noticed, and I take your question further to the “experts”
of this type, “Is it meant to have an influence on the simulation”?
Kind regards,
François Badinier
Development Engineer
ICAX Ltd
1 Hatfield House
Baltic Street West
London EC1Y OST
From: Nicola Sorbi Unipg
[mailto:nicolasorbi@mach.ing.unipg.it]
Sent: 02 February 2010 09:44
To: Goran.Hellstrom@matfys.lth.se; TRNSYS ALL USER;
transsolar@transsolar.com
Subject: [TRNSYS-users] information about Tape 557 Transys
Dear
professor, I’m a PhD working in Perugia University.
I’m
using Trnsys to simulate a GHP system. I’m using the Tape 557 “Duct
Ground Heat Storage Model”. I need to know the meaning of the parameter
“Number of simulation years”.
If
I use a value of 10 year and I print the values of ground temperature simulated
using TRNSYS16 (using 8760 hours of simulation in Transys), does the software
give the temperature after 10 years of simulation?
Waiting
your reply,
Best
regards.
Nicola
Dott.
Ing. Nicola Sorbi
UNIVERSITA' DEGLI STUDI DI PERUGIA
Dipartimento di Ingegneria Industriale
Via G. Duranti 1A/4 - 06125 Perugia
Tel. +39 075/5853930 - Fax. +39 075/5853736
E-mail nicolasorbi@mach.ing.unipg.it
No virus
found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.733 / Virus Database: 270.14.150/2632 - Release Date: 02/01/10
12:37:00