Re: [TRNSYS-users] (no subject)

[David Bradley <bradley@tess-inc.com>]

Sek,
  Type108 is limited to watching a single temperature. You can use multiple instances of Type108. There is a component (Type698 in the TESS Controls Library) that will watch multiple zones and make multiple control decisions (one for each zone that it is watching).
Best,
 David


#SEK JUN-YANG# wrote:

Dear trnsys users,

 

I've simulated a conventional air condition system with 8 zones representing the floor area. I've split the 8 zones into 2 groups with different areas and attempted to use 2 thermostats, type 108, to control each group to obtain 2 different sets of results. However, when I link the building to type 108, I am only able to link one zone to the monitoring temperature. I would like to find out if it is possible to either seperate the 8 zones into 2 groups and controlled by 2 thermostats, or combine the total zones to be controlled by one thermostat. Any advice would be greatly appreciated

 

Best Regards,

Sek Jun-Yang

 

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@cae.wisc.edu
https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
  

-- 
***********************************************************************
Thermal Energy System Specialists (TESS), LLC 
David BRADLEY                      22 N. Carroll Street - Suite 370 
Partner                            Madison, WI 53703 
                                   USA
P: +1.608.274.2577 
F: +1.608.278.1475
E-mail: bradley@tess-inc.com 
Web Pages:  http://www.tess-inc.com    and      http://www.trnsys.com

***********************************************************************