|
Dear all, I started using the Type 705 Slab component and I found
something that look like an error, unless I misunderstand something. I created a simple project with the slab itself, not
connected to anything, because my aim is simply to plot the deep earth
temperature calculated with the Kusuda equation . In this project, the slab height is 0.1m deep, and the deep
earth for the soil is 1m deep. So the total depth of the soil is 1.1m. When I plot it against an independent Kusuda calculator (Type77)
for the same depth, I don’t find the same curves/results. (see
attached project + don’t forget to save the
.pipe in the project folder) I made sure the soil properties are the same in both
component. Is there really something wrong or do I miss something
there? Best regards, François Badinier Development Engineer ICAX Ltd 1 Hatfield House
Baltic Street
West London EC1Y OST |
Attachment:
Slab_testo.Pipe
Description: Binary data
Attachment:
Slab alone test.tpf
Description: Binary data