|
Dear Trnsys-users,
I am trying to model a multizone building
with a humidification and dehumidification system which
has setpoints respectively at 40% and 60% relative
humidity.
This is done by
adding humidification and dehumidification to the heating and cooling type
respectively
in the building model. However, I have the problem
that e.g. if the cooling is off, the dehumidification
is also not working, and thus the relative
humidity exceeds 60%.
My question is thus, Is it possible to add
dehumidification without cooling or humidification without
heating in the building model, or are both always
coupled? Is there any way to solve this problem?
Thanks a lot for your help.
Best regards,
ir-arch Marijke Steeman
Universiteit Gent
Vakgroep Architectuur en Stedebouw Onderzoeksgroep Bouwfysica en Installaties Jozef Plateaustraat 22 B- 9000 Gent tel 09 264 37 52 / fax 09 264 41 85 marijke.steeman@ugent.be |