[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] Control Cards -weather data

Dear Artemi Spanaki,

The control card in the "settings" file menu will set the start and stop time for all new projects that you create in TRNSYS.  In the assembly menu in the simulation studio, the time is set for only that specific project that is open. 

That sounds like the correct way to use the external weather file.  You will get an error if it does not work.

Best regards,

Matt Duffy



Technical Support Team
Thermal Energy System Specialists, LLC
2916 Marketplace Dr, Suite 104
Madison, WI 53719
techsupport@tess-inc.com



----- Original Message -----
From: "Artemi Spanaki" <spanakiart@hotmail.com>
Sent: Wed, July 23, 2008 15:09
Subject: [TRNSYS-users] Control Cards -weather data

Dear sir.

 

Your answers were very useful. I would like to ask you a couple of things.

 

I set the simulation start and stop time and time step in the control card, using assembly menu. Opening control card using the command "settings" in file menu the values is different that the values set. What is the difference between two commands?

 

I am trying to use weather data, created by meteonorm 6.0.1.8 in my simulation, using type 109-TMY2, selecting a file in form *.tmy2 in the external files, using the "browse" command. Is that the correct way?

 

Thank you very much.

 

A. Spanaki

 


Get news, entertainment and everything you care about at Live.com. Check it out!
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@engr.wisc.edu
https://www.cae.wisc.edu/mailman/listinfo/trnsys-users