[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] Automatization in running .dck-files



Dear Julian,

I have no troubles with the following batch using TRNSYS15:

start /wait C:\trnsys15\trnsys.exe EBASES69.dck /n
start /wait C:\trnsys15\trnsys.exe EBASES69.dck /n
start /wait C:\trnsys15\trnsys.exe EBASES69.dck /n

Are there any messages in the command shell? Try to start the batch in the command shell and send us the messages. Maybe it helps.

Best regards
Hermann Schranzhofer.

_______________________________________________________________

 DI Dr. mont. Hermann Schranzhofer
 Institut fuer Waermetechnik / Institute of Thermal Engineering
 TU Graz / Graz University of Technology  	
 Inffeldgasse 25 / B, A-8010 Graz	
 
 Tel.: +43 316 873 7314
 Fax : +43 316 873 7305
 http://www.iwt.tugraz.at/
_______________________________________________________________
 
 
-----Ursprüngliche Nachricht-----
Von: Julian Demetz [mailto:julian.demetz@gmail.com] 
Gesendet: Montag, 30. Juli 2007 04:02
An: 'Diego A. Arias'
Cc: trnsys-users@engr.wisc.edu
Betreff: Re: [TRNSYS-users] Automatization in running .dck-files

Dear Diego, dear Trnsys Users,

It's very strange, but also if I put "/n" at the end of the command line in
my batch file the dialog box still appears and I need to click. I'm using
TRNSYS 15. Did this ever appear before?

Best regards

Julian Demetz

-----Ursprüngliche Nachricht-----
Von: Diego A. Arias [mailto:daarias@wisc.edu] 
Gesendet: Mittwoch, 25. Juli 2007 11:15
An: Julian Demetz
Cc: trnsys-users@engr.wisc.edu
Betreff: Re: [TRNSYS-users] Automatization in running .dck-files

Dear Julian,

In TRNSYS16, if you go to the manual Volume 1, section 1.10 'Running 
TRNSYS in batch files or in hidden mode', you will find that it is 
possible to run TRNSYS with additional switches:
c:\TRNSYS16\TrnExe.exe c:\mydeck.dck /n
where /n tells TRNSYS to skip the dialog box at the end of the simulation.
Another swich /h runs TRNSYS in hidden mode.  You need to disable all 
online plotters, setting parameter 9 to -1, if you really want to run in 
hidden mode.

Best regards,

Diego



_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@engr.wisc.edu
https://www.cae.wisc.edu/mailman/listinfo/trnsys-users

Attachment: Hermann Schranzhofer.vcf
Description: Binary data