[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TRNSYS-users] TYPE 97 and CONTAM
Giacomo,
It may be an issue of air density. I think
that CONTAM reports volumetric flows while TRNSYS
uses mass flows. I am not sure that there is any
way of finding out what the density of the air flows in CONTAM is.
Cheers,
David
At 11:53 7/19/2007, giacomo.villi@unipd.it wrote:
Hi,
I am having some problems with TYPE 97. I am modeling a single zone building
and i have told TYPE 97 to print the airflow from that zone to the ambient
and from the ambient to that zone (the two values should be the same of
course) as
I want to be sure that everything is working properly.
Air is supposed to flow in from one device at the bottom of the zone and
it is leaving from three exits in the top.
In CONTAM everything seems to work fine but in TRNSYS i am told that the
two values (inflow and outflow) are different.
Any help will be appreciated,
thanks in advance
giacomo
--
Giacomo Villi
Univerisità degli Studi di Padova
Dipartimento di Fisica Tecnica (DFT)
Tel: +39 049 8276871
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@engr.wisc.edu
https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
****************************************************************************************
Thermal Energy System Specialists (TESS), LLC
David BRADLEY 2916 Marketplace Drive - Suite 104
Partner Madison, WI 53719
Phone: (608) 274-2577 USA
Fax: (608) 278-1475
E-mail: bradley@tess-inc.com
Web Pages: http://www.tess-inc.com and http://www.trnsys.com
"Providing software solutions for today's energy engineering projects"
****************************************************************************************