[TRNSYS-users] (no subject)

[Christos Stergiou <chris_s1285@hotmail.com>]

Hello,
I am new using Trnsys 16 and i would find useful some help in my project. I want to compare the heat transmitted from the walls into a multi-zone building. Since i am going to use several different walls in the same building i would like to know if it is possible to set as a parameter the type of wall (or it's characteristics) and run the project using TRNEdit. I have already tried using Gen-Opt but i didn't find a way. I don't have TRNOpt. If it is not possible to do this with TRNEdit please inform me about the suitable program to do so. As i also need to do the same with the radiation transmitted through the windows, please describe me any difference (if there is any) in the procedure required comparing the walls.
                                                                                                                                        Thanks in advance,
                                                                                                                                                 Christos

---

Change is good. See what's different about Windows Live Hotmail. Check it out!