[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] type 34

Dear Gilles,
You have to set the azimuth of the surface in Type16 and Type34. Is it possible that you forgot to modify one of them? 
Regards,

Diego

Gilles Fraisse wrote:

dear trnsys users
using type 16 + type 34 , the "direct beam fraction" doesn't change when I change the azimuth of the surface. I calculated (with equation) the direct beam fraction separatly and it seems to be the values for Azimuth=0. 

I must make a mistake, but I don't know where.
does anybody has an idea ?
best regards
G. Fraisse
°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°° 
LOCIE - groupe DENED (Développement Énergétique Durable)
Polytech'Savoie - Université de Savoie
Campus Scientifique Savoie Technolac
73376 - Le Bourget du Lac Cedex (France)
Tel. +33 (0)4.79.75.88.95  (Fax : 81.44)
°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°

------------------------------------------------------------------------

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@engr.wisc.edu
https://www.cae.wisc.edu/mailman/listinfo/trnsys-users



--
Diego A. Arias
TRNSYS Coordinator
Solar Energy Laboratory
University of Wisconsin - Madison
1500 Engineering Drive
Madison, WI 53706