[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] thermosyphon system Type 45

Dear Mohammad,
The output that gives you the energy rate from the auxiliary heater is output 10 "Auxiliary heating rate". The output "energy rate from the heat source" is the energy that is captured by the solar collector. 
Best regards,

Diego

mohammad abdunnabi wrote:

Dear Transys-users

I have tried to run thermosyphon solar system (TYPE
45) connect with Type109-TMY2, Type14h forcing
function, and Type24 quantity integrator.implementing
in TRNSYS studio, It seems very easy, however, the
results has no sense because of the wrong reponse of
the auxiliary heating. even if I put "maximum heating
rate" equal to zero still the output "energy rate from
the heat source" has value. could anyone help me in
solving this problem as I'm new user ( student) and I
have alot of time to sort it.

thanks in advance

M. Abdunnabi
civil and Building eng.
Loughborough Univeristy
LE11 3TU, UK

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com _______________________________________________ 
TRNSYS-users mailing list
TRNSYS-users@engr.wisc.edu
https://www.cae.wisc.edu/mailman/listinfo/trnsys-users



--

Diego A. Arias
TRNSYS Coordinator
Solar Energy Laboratory
University of Wisconsin - Madison
1500 Engineering Drive
Madison, WI 53706