[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TRNSYS-users] Questions for TYPE 94 (PHOTOVOLTAIC ARRAY)
Dear Tony,
TNT Lam wrote:
> Hello,
> I am a fresh user of TRNSYS and I am going to model the TYPE 94
> photovoltaic system.
> The sloped PV array is connected to a battery, so as to observe the
> power generation. However, I got some questions.
> 1. For INPUT No.6 & 7 (Beam radiation and Diffuse radiation), ! are
> the values required to be normal to the sloped PV surface?
Yes, these are the beam an diffuse radiation normal to the surface.
> 2. Particularly INPUT No.7 (Diffuse radiation), does the value include
> ground-reflected radiation? Or, is ground-reflected radiation not
> included in INPUT No.7?
This term should include all terms for diffuse radiation. Type94 does
not know how you calculated this value.
> 3. For INPUT No.1 (Total incident radiation), is the value equal to
> the sum of INPUT No.6 & 7?
In theory, yes. However, when you are using weather data files, you may
find that during sunset or sunrise, as the radiation is so small, the
precision of the instruments may result in values that do not add up as
the theory.
Best regards,
Diego
> I am looking forward to r! eceiving reply.
> Thanks a lot.
> Regards,
> Tony NT Lam
>
> _______________________________________
> YM - 離線訊息
> 就算你沒有上網，你的朋友仍可以留下訊息給你，當你上網時就能立即看到，任
> 何說話都冇走失。
> http://messenger.yahoo.com.hk
>
>------------------------------------------------------------------------
>
>_______________________________________________
>TRNSYS-users mailing list
>TRNSYS-users@engr.wisc.edu
>https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
>
>
--
Diego A. Arias
TRNSYS Coordinator
Solar Energy Laboratory
University of Wisconsin - Madison
1500 Engineering Drive
Madison, WI 53706