Has anyone had any success using Type 56 in TRNSYS 16 with sub-hourly
timesteps? The model runs OK at a 1-hour timestep, but anything less than
an hour and the program aborts 23 hours into the simulation. I have tried
increasing and decreasing the time base of the walls, keeping in mind that
it needs to be an integer multiple of the timestep, but this hasn't
helped.
Thanks,
Bill Rittelmann
IBACOS, Inc.
***E-mail Confidentiality Notice***
The information contained in this e-mail message and any attachments may
constitute confidential information. The information is intended only for
the use of the intended recipient. You are hereby notified that any
dissemination, distribution or copying of this communication by anyone
other than the intended recipient is strictly prohibited. If you have
received this communication in error, please notify the sender by reply
e-mail and delete this message and any attachments thereto. Thank you.
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@engr.wisc.edu
https://www.cae.wisc.edu/mailman/listinfo/trnsys-users