Re: [TRNSYS-users] HELP! Informations about Liquid Desiccant Cooling System

["Diego A. Arias" <daarias@wisc.edu>]

Dear Bruno,

The thesis that you found on the SEL webpage used TRNSYS12.    I took a 
quick look at the subroutines in the thesis, and I guess that there 
might be a conflict in the handling of the logical unit numbers.  In the 
code a subroutine uses a logical unit number 6, which may be in use by 
other subroutines.
Another idea is that the type numbers used in the thesis are standard 
components.
I hope this helps.

Diego

roberto-bruno@libero.it wrote:

> Dear ALL,
> I've found on web a M.S. Thesis of Dawne Stevens with a TRNSYS subroutine to simulate conditioner/regenerator of a Liquid Desiccant Cooling System. I've compiled these subroutine introducing the adjustment to converte it for TRNSYS 15. The subroutine runs but it provides wrong results. In fact the results are the same for the whole period of the simulation. I've give a look to the subroutine but I've not found any mistakes. I hope that somebody can give me any suggestions to resolve these problems as soon as possible. I hope that somebody had worked with this subroutine too to give me other informations.
> Best Regard to all.
>
> Roberto Bruno
> University of Calabria
> ITALY
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users@engr.wisc.edu
> https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
>  


--

Diego A. Arias
TRNSYS Coordinator
Solar Energy Laboratory
University of Wisconsin - Madison
1500 Engineering Drive
Madison, WI 53706