[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TRNSYS-users] trnsys15-type 56, 68, 34 solar control
Dear Xavier,
Another solution to connect type 34 overhang to the building is
trough the shading factor : select an input as a shading factor for the
window and connect it to the correspondant output of type 34.
Best regards,
Isabelle
A 13:38 23/08/2005 +0200, Xavier Dequaire a écrit :
HI all,
I have used so far type 56 to describe a building (passive solar)
Next step is to explore strategies to limit solar gains.
There are some tools I found
type 68 shading mask
type 34 overhang and wing wall
I did not find information on how to integrate this to my model
Especially to put in relation a specific overhang to a specific
window.
As for sources of shadow due to distant objects and landscape, I assume
I
can use Meteonorm to generate a new weather file taking it into
account
for the solar radiation on the whole building.
thanks for help
Xavier D.
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@engr.wisc.edu
https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
Isabelle
Bruyère
Université Catholique de Louvain
Place
du Levant, 1 à 1348 Louvain-la-Neuve
Unité d'architecture - Architecture et
Climat Tél
: 010/47 21 38 - Fax : 010/47 21 50