|
Dear TRNSYS-16 users,
I am trying to implement COMIS 3.1
as an external dll (type 157.dll) in TRNSYS 16 - I have already used
the coupling between TRNSYS 15 and COMIS - but have some problems.
I used CVF 6.6B, followed the instructions in the
manual to create a library of user components (progammer's guide p.8-114 to
116), added the source code of COMIS (except COMV-MAI.for) and the
coupling file COMV-TRN.for as described in the coupling package of COMIS
3.1-Trnsys 15.3 and succesfully created type157.dll in Trnsys16\Userlib.
But I failed to run the example of calling Comis 'rest_comT16_C31.tpf' and got
the following warmings and errors:
- notice: "Type157.dll" was found but did not
contain any components from the input file.
- notice 2: TRNSYS found at least one user DLL in
the UserLib directory. (Note: Only DLL's including Types that are used in the
simulation are loaded) 0 user DLLs were loaded after searching in
"C:\Trnsys16\UserLib"
- Fatal Error, Generated by
Type 157: A TYPE was called in the TRNSYS input file but was either
not linked into trndll.dll or was not found in an external dll. A dummy
subroutine was called in its place. Please link the TYPE or remove it from the
input file
Where did I go wrong? And how can I solve this
problem?
best regards,
hilde
Hilde Breesch
PhD student Buildings & Climatic Control Department of Architecture & Urban Planning Ghent University J. Plateaustraat 22, B-9000 GENT tel. +32 9 264 78 61 fax. +32 9 264 41 85 e-mail: Hilde.Breesch@UGent.be http://allserv.ugent.be/~hbreesch/research |