[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] Trnsys3d plugin

Dear Aly, 

If you have 3D geometry in your SketchUp-File (imported from dwg/ifc/..), that is suited for TRNSYS (closed room volumes, like with ifc spaces), you can also copy this geometry into a Trnsys3d zone. For this you should best open a new SketchUp instance, there add an empty Trnsys zone and then with the zone activated copy the geometry from the other file into the new one (file -> past in place). That way the geometry becomes associated with the zone like if you drew new geometry with the zone activated. We are currently working on updating the Trnsys3d Tutorial including a better explanation on how this works. 

Best regards,
Christina

__________________________________________________________________________________________________

 

Transsolar KlimaEngineering

Stuttgart  | München | Paris | New York



Transsolar Energietechnik GmbH | Curiestraße 2 | 70563 Stuttgart

Geschäftsführer: Matthias Schuler, Thomas Auer, Stefan Holst, Dieter Schnelle

Registered at Amtsgericht Stuttgart HRB 23347 | USt-IdNr.: DE 152272639

 

The simulation project you have sent will be stored on the local servers of Transsolar Energietechnik GmbH for the duration of the project support. Our employees are obliged by us to confidentiality. After this period, all project-related data is deleted.

 

The storage of your personal e-mail and other contact information is based on the mutual interest in the execution of this traffic and on a mutual business contact. If you have any questions, please contact our data protection officer at privacy@transsolar.com. Our privacy policy can be found here.

Von: TRNSYS-users <trnsys-users-bounces@lists.onebuilding.org> im Auftrag von David BRADLEY via TRNSYS-users <trnsys-users@lists.onebuilding.org>
Gesendet: Montag, 28. November 2022 16:38
An: TRNSYS users mailing list at OneBuilding.org <trnsys-users@lists.onebuilding.org>
Cc: David BRADLEY <d.bradley@tess-inc.com>; Aly Osman <s132388@student.squ.edu.om>
Betreff: Re: [TRNSYS-users] Trnsys3d plugin
 

Aly,

 I believe that you have to trace over the *.dwg file using the same tools that you used when creating the model from scratch.

kind regards,

 David


On 11/26/2022 00:17, Aly Osman via TRNSYS-users wrote:
Dear All, 

I am trying to use the trnsys sketchup plug-in. I have imported my dwg files and I need to identify my zones, when I was learning about the plug-in I was drawing my buildings inside the zone created but now I have a building ready, how can I redraw them in the zone?

--
Kind regards,

Mr. Aly Osman
MSc. Mechanical Engineering

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy System Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
d.bradley@tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com