[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] How to Use GenOpt with TRNSYS



Dear Fabian

According to the documentation, you to install java file and copying its directory into a specific space, Before using Genopt. Then selecting the targeted files. Select parametric from the methodology list after selecting the parameters and their value range. Furthermore, you need to select the targeted function. 

Thank you 
Mukhtar 

في أربعاء، 15 يونيو، 2022 في 8:15 ص، كتب Fabian Eze via TRNSYS-users <trnsys-users@lists.onebuilding.org>:
Dear All,

I simulated both horizontal and vertical ground heat exchangers on TRNSYS, however my results especially with the horizontal configuration deviates much from my experimental data.

I want to use GenOpt for parametric analysis in order to minimize the error. Please can anyone help to guide me through this? I have not used GenOpt  before. I don't know how it is used with TRNSYS.

Your help is much appreciated!

Regards,

Fabian. 
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org