Hey Maja,
Now for this, unfortunately I don't have the answer so I would be grateful if you could CC me if you got any solutions in private.
Bests,
Now for this, unfortunately I don't have the answer so I would be grateful if you could CC me if you got any solutions in private.
Bests,
László
PhD student, Building Energy Engineering
PhD student, Building Energy Engineering
Budapest University
of Technology and Economics
Feladó: TRNSYS-users <trnsys-users-bounces@lists.onebuilding.org>, meghatalmazó: Maja Danovska via TRNSYS-users <trnsys-users@lists.onebuilding.org>
Elküldve: 2022. április 5., kedd 13:42
Címzett: trnsys-users@lists.onebuilding.org <trnsys-users@lists.onebuilding.org>
Másolatot kap: Maja Danovska <maja.danovska@unitn.it>
Tárgy: [TRNSYS-users] Air couplings TRNBuild
Elküldve: 2022. április 5., kedd 13:42
Címzett: trnsys-users@lists.onebuilding.org <trnsys-users@lists.onebuilding.org>
Másolatot kap: Maja Danovska <maja.danovska@unitn.it>
Tárgy: [TRNSYS-users] Air couplings TRNBuild
Dear Users,
I would like someone to explain to me better the AIR COUPLING option in every single thermal zone, when it should be used, and how...
I have a geometrical model of a library which was divided into different thermal zones, some of them with real boundaries (i.e., walls), others with virtual surfaces or maybe modelled with a ceiling but in reality there you have stairs, so the volumes
are connected. This is just an example. Where should I use the air coupling?
Thanks in advance.
Kind regards
--
Maja Danovska
Research Fellow
Dep. of Civil, Environmental and Mechanical Engineering
University of Trento
University of Trento
via Mesiano, 77 - 38123 - Trento - ITALY
+393403391289