Hey
Trnsys-Community,
on the basis of a working model, I extended the
model to a finer zone definition, from 15 to 45 zones. In my
dck file I have a view unites which are existing for every
zone discrete, using type 2. Then I had to increase the
maximum number of equations, because the default number was
exceeded by my simulation.
When running the simulation I get for all the
type 2 units the same error, also for the ones, which were
working in my functioning 15-zone-simulation:
I don’t even now, what the message text really
says – is it now about the output value or the number of
outputs….
The second error I get a lot, especially for
the units 46 and 31, is the following:
*** Fatal Error at time : 0.000000
Generated by Unit : 430
Generated by Type : 31
TRNSYS Message 468 : The
getStaticArrayValue function was called with an index
greater than that specified for the total number of dynamic
variables in the SetNumberStoredVariables subroutine call.
Please check the formulation of the specified TYPE, rebuild
the dynamic link library and re-run the simulation.
Reported information : Not available
Can somebody help me solving the problem? For
me it seems that there is one error prior to my mentioned
errors
Thanks in advance!
Regards,
Manfred Schindler
_______________________________________________ TRNSYS-users mailing list TRNSYS-users@lists.onebuilding.org http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org