Habtamu,
Which component are you using to read the weather data? If you
are using a Type9 then your simulation will keep reading data
until it gets to the end of the file. If you wanted to run all
four years then you would simply run a simulation with a start
time of 0 and an end time of 35040. There are modes of Type9 that
will allow you to start the simulation partway through the data
file. If you wanted to run 2016 and 2017 you'd set your start time
to 8760 and your end time to 17520. If you use Type9 then you'll
also need to use Type16 to process the solar radiation data.
kind regards,
David
Dear allI used weather data that has a different value for different years, for example, from 2015-2018 years data in given weather. however, when I start to simulate the TRNSYS model for 8760hr it will give us a year result (for example, outside temperature), which year is used for the simulation and how can we change to the other year to be used for the simulation?
Thanks--
------------------------------------------------------------------------------------------------------Habtamu TkubetDoctorantUniversité de Lorraine
Faculté des Sciences & Technologies - LERMAB and CRANEpinal, FranceTél :+2519 11 79 05 22 /773623147
_______________________________________________ TRNSYS-users mailing list TRNSYS-users@lists.onebuilding.org http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-- *************************** David BRADLEY Principal Thermal Energy Systems Specialists, LLC 3 North Pinckney Street - suite 202 Madison, WI 53703 USA P:+1.608.274.2577 d.bradley@tess-inc.com http://www.tess-inc.com http://www.trnsys.com